TOPWINGS Chemical Coating

Guangzhou Zhenroumei Chemical Coating Limited

Language: Chinese|English
86-189 0232 2286
Home  »  Products  »  GOODSIF Series


MF1K Solid Colors (Basecoat Colors)

Release time:2016-07-11 17:48:50 Click volume:
Product Name/Model:MF1K Solid Colors (Basecoat Colors)
Characteristic:MF1K Solid Color with excellent leveling property,easy construction,excellent adhesion power and coveraging power,can match all kinds of solid colors, metallic and pearl effect. Mainly applies to intermediate cars, MPV and bus.
Well-Sanded, Completely dried and good existing finishes as bellow:A original paint   B. Old paint firm   C. 1K or2k primer
Surface  Cleaning
Wash by warm soap, remove wax, silicon and other contaminations with degreaser, sanding with P800-P1000,wash with clean water then keep dry; again with degreaser.
Mixing Ratio
MF1k Solid Colors
1 1
MF1k Solid Colors
60 Fast Thinner
MF1k Solid Colors
61 Standard Thinner
MF1k Solid Colors
62 Slow Thinner
Spray Viscosity
14-16s to drop off, in 4# viscosity cup at 25°C,
After spray, allow 10-20 minutes air-drying time,then spray clear coat at once.
Spray Gun Set Up
Gravity Feed: 1.2-1.5mm 3-5kg/cm ²
Suction Feed: 1.4-1.6mm 3-5kg/cm ²
Coats&Thickness: 2-3 coats, total 15-20um.Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends on temperature and paint film.
Shelf Life
2 years in original sealed can, cool and dry place at 25℃.
1L×12 or 3.75L×4
1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.
2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner to avoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.
3. To avolid problems of mottling or poor adhesion, the metallic paint film should be 15-25um.


Tel:86-189 0232 2286 (whatspp/skype/telegram)

  • 看不清楚? 换一张!