TOPWINGS Chemical Coating

Guangzhou Zhenroumei Chemical Coating Limited

Language: Chinese|English
86-189 0232 2286
Home  »  Products  »  BOYET Series

BOYET Series

Extra Fast Clear Coat Varnish

Release time:2016-07-11 16:15:38 Click volume:
Product Name/Model:BYTC15 Extra Fast Clear Coat.

Characteristic: Extra fast drying clear coate, high gloss and hardness, easy application, low consumption and high efficiency to ensure good profit, suitable for fast spots repair.


Substrates
1K Basecoat.
Mixing Ratio
Clear Coat
Hardener
Thinner
2
1
0.1-0.3
<25℃
BYTC15 Extra FastDrying Clear Coat
BYTC150 Extra FastDry Hardener
BYTX-1 Fast Thinner
SprayViscosity
14-16s to drop off, in 4#viscosity cup at 25°C,
Pot-Life
At 25°C, 1.5 hour.
ReTreatment
There are particles or runs after spray, sand affected area with P2000 sand paper after thorough drying, then polish to solve the problem.
Spray GunSet Up
Gravity Feed: 1.2-1.5mm 4-5kg/cm 2
Suction Feed: 1.4-1.6mm 4-5kg/cm 2
SprayTechnology

Coats&Thickness: 2-3 coats, total 25-35um

Flash-Off Time: At 25°C,5-10 minutesbetween two coats,Air-Drying Time: Allow 10-15 minutes air drying time before force drying

Drying Time
Temperature
Dust Free
Tack Free
Dryto Handle
Dry toTest
25°C
15 minutes
2 hours
4 hours
5 days
70°C
3 minutes
10 minutes
15 minutes
45 minutes
Shelf Life
2 years in original sealed can, cool and dry place at 20℃.
Package
5L×4 or 2.5L×8 or 5L+2.5L+1L

Note:
1. This products are extra fast reaction, after mixing clear coat with hardener, just add small quantity of thinner for spraying, the mixture should be used up within 1 hour.
2. The spray viscosity could not be too high, in case of paints defects, such as orange skin.
3. This product is suitable for spots repairs, not suitable for overall repair.
4. At temperature lower than 8°C, a forced dry by baking is recommended.
5. It is recommended to apply at conditions of temperature lower than 25°C and humidity lower than 80%, otherwise there will be defects such as blistering or blushing.
6. The products mixed with hardener should be used up soon and can not be restore for future use; clean equipments immediately with thinner after application, otherwise it is very difficult to be cleaned after dry.

China, factory, manufacturers, quotation, high quality, made in ChinaVarnish made in China with our professional manufacturers

China Auto Paint factory

CONTACT US

Fax:86-020-87833398
Tel:86-189 0232 2286 (whatspp/skype/telegram)
Email:export003@topwingspaint.com

  • 看不清楚? 换一张!