TOPWINGS Chemical Coating

Guangzhou Zhenroumei Chemical Coating Limited

Language: Chinese|English
86-189 0232 2286
Home  »  Products  »  MARSIDE Series


Clear Coat Series

Release time:2016-07-11 17:10:51 Click volume:
Product Name/Model:Clear Coat Series
1、 MSK-8000Clear Coat :Two- component 880 clear coat with super-high density and solid,deep rich gloss, high hardness, excellent weathering and chemical resistance. Applies to senior cars, suitable for overall refinish, quality and performance compare favourably with many imported clear Coats
2、 GH-5000Clear Coat:Two-component fast drying 5000 clear coat with excellent gloss, high hardness, excellent weathering and chemical resistance.
3、 GH-3000Clear Coat:High gloss 380 clear coat, with high richness, good levelling property,easy construction, high hardness, excellent chemical and weathering resitance. Be paint film in lower temperature. Application in Medium, Senior car, MPV, Bus.
4、 MSK-2000Clear Coat:High gloss and high hardness two-component 280 clear coat, easy construction, fast dry, good pretective power and weathering resistance, save cost and time during refinish.Application in standard car, construction machinery.
1K Basecoat.
Mixing Ratio
Clear Coat
1 0.2-0.5
A  、<15℃ :90 Fast Thinner; B 、 15-30℃:91 Standard Thinner; C、>30℃:92Slow Thinner
Spray Viscosity
16-19s to drop off, in 4# viscosity cup at 25°C,
At 25℃
4 hours with fast hardener.
4 hours with standard hardener or slow hardener.
There are particles or runs after spray, sand affected area with P2000 sand paper
after thorough drying, then polish to solve the problem.
Spray Gun Set Up
Gravity Feed: 1.2-1.5mm 4-5kg/cm²
Suction Feed: 1.4-1.6mm 4-5kg/cm²
Spray Technology
Coats&Thickness: 2-3 coats, total 25-35um
Flash-Off Time: At 25°C, 5-10 minutes between two coats,
Air-Drying Time: Allow 10-15 minutes air drying time before force drying
Drying Time
Dust Free
Tack Free
Dry to Handle
Dry to Test
30 minutes
2 hours
8 hours
6 days
5 minutes
10 minutes
25 minutes
60 minutes
Shelf Life
2 years in original sealed can, cool and dry place at 20℃.
5L×4 or 2.5L×8 or 5L+2.5L+1L
1. At temperature lower than 15°C, air-dry at ambient temperature is not recommended. Better to allow a full bake at 60°C.
2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner to avoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.
3. The products mixed with hardener should be used up soon and can not be restore for future use; clean equipments immediately with thinner after application, otherwise it is very difficult to be cleaned after dry.


Tel:86-189 0232 2286 (whatspp/skype/telegram)

  • 看不清楚? 换一张!