TOPWINGS Chemical Coating

Guangzhou Zhenroumei Chemical Coating Limited

Language: Chinese|English
86-189 0232 2286
Home  »  Products  »  MARSIDE Series


BC1K Pearl Colors(Basecoat Colors)

Release time:2016-07-11 16:38:30 Click volume:
Product Name/Model:BC1K Pearl Colors
Characteristic:BC1K Pearl Colors with excellent leveling property,easy construction,excellent adhesion power and coveraging power,can match all kinds of solid colors, metallic and pearl effect. Mainly applies to intermediate cars, MPV and bus.
Well-Sanded, Completely dried and good existing finishes as bellow:
A original paint B. Old paint firm C. 1K or2k primer
Surface Cleaning
Wash by warm soap, remove wax, silicon and other contaminations with degreaser, sanding with P800-P1000, wash with clean water then keep dry;again with degreaser.
Mixing Ratio
BC1K Pearl Colors
1 1
A  、<15℃ :90 Fast Thinner; B 、 15-30℃:91 Standard Thinner; C、>30℃:92Slow Thinner
Spray Viscosity
14-16s to drop off, in 4# viscosity cup at 25°C,
After spray, allow 10-20 minutes air-drying time,then spray clear coat at once.
Spray Gun Set Up
Gravity Feed: 1.2-1.5mm 3-5kg/cm²
Suction Feed: 1.4-1.6mm 3-5kg/cm²
Spray Technology
Coats&Thickness: 2-3 coats, total 15-20um.
Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends on
temperature and paint film.
Shelf Life
2 years in original sealed can, cool and dry place at 25℃.
1L×12 or 3.75L×4

1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.
2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner to avoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.
3. To avolid problems of mottling or poor adhesion, the metallic paint film should be 15-25um.


Tel:86-189 0232 2286 (whatspp/skype/telegram)

  • 看不清楚? 换一张!