How to deal with many paint problems：
Generally, during the use of our car, the following damages will occur:
1. Paint surface oxidation
When the car paint surface is irradiated by ultraviolet rays, the paint film will continuously evaporate oil into the air. When the oil evaporates to a certain level, the brightness and depth of the paint surface will be greatly reduced, and the paint surface begins to form an oxide layer, which is visible to the naked eye. The paint is discolored.
Generally, oxidation can only be solved by grinding and polishing.
2. Traffic "membrane"
Usually our car will generate a strong electrostatic layer due to air friction during driving. This electrostatic layer will absorb all kinds of dust, oil and chemical dust in the air. Over time, as the molecules interact with each other, The attached dust will form a hard traffic "film", which is not only difficult to clean, but also corrodes the paint surface of the car.
If the time is short, it can be cleaned by detergent, if it is longer, it can only be treated by polishing and grinding.
3. Fading
Fading is a paint problem. Once the car body fades, not only will the car look older, it will also greatly reduce the appearance of the car.
Fading is different from oxidation. Fading is usually an uneven color difference in the paint. If the situation is lighter, it can be solved by grinding and polishing. If the situation is serious, it can only be repainted.
4.All kinds of small scratches
Scratches on the car body are usually caused by friction and improper care in the daily use of the car. Such fine scratches are especially obvious in the sun.
Generally, if there is no damage to the primer, it can be polished.
5. water stains
Water stains are usually traces left by the evaporation of water droplets on the car body. Generally, the lacquer surface is oxidized or the car that often uses detergents such as detergent is prone to water stains.
Generally, it can be treated by waxing and polishing. If it is serious, it needs to be ground or repainted.
6.corrosion marks
Corrosion marks are surface abrasion, caused by insects, bird droppings, resin, asphalt and other corrosive substances attached to the car body.
Generally speaking, it can be cleaned with detergent for mild conditions. If it is more serious, it needs to be polished and polished. If it is particularly serious, it can only be repainted.
7. cracks
If the paint surface is not treated normally, some tiny cracks will be produced on the paint surface. These cracks will slowly penetrate the car paint over time and eventually cause the paint surface to crack. If the quality of the repainting is not good enough, it will also cause the paint surface to crack.
Generally, maintaining a good habit of waxing can prevent cracks on the paint surface.
