What Are the Techniques for Painting the Front Cover of A Car?

Spraying the front cover of the carby Refinish Car Paint, silver powder is easy to spray, varnish guns are easy to leak, easy to spray thick, these problems are very common for novices, but as long as you master the skills, you can solve many problems with the front cover. As shown in FIG:
Centered on the center line AB, the left side of the station (or the right side), from the middle AB line to the left side of the vertical spray, after the left side of the spray, the person standing on the right, from the middle AB line to the right side of the vertical spray, the entire surface is sprayed The paint surface is basically evenly distributed, and the spray gun is not blocked because of the movement of the arm and the reflection of the paint surface, but the only drawback is that this method is easy to fly paint.
Personally feel that the paint is good and bad, the impact of the gun is very big, when to use wet spray, semi-wet spray, dry spray, etc., the experience depends on a little accumulation. When you know everything, you will feel that painting is not difficult.
There is no single spray method for car painting. Each method has its own method. It is the best method for you. Thank you for your support!

This article was published by professional Car Paint Thinner Supplier. Please indicate the source for forwarding.