What Are the Spray Methods for Automotive Paints?

Car paint from Car Paint Thinner Factory is familiar to many people. Everyone knows that car paint is composed of many paint layers. Professional personnel are required to take professional methods to spray. Here is a welfare for everyone. Zhenroumei Car Epoxy Primer Manufacturer  hope you can learn. Spray paint of the car!

  1. First of all, it is necessary to repair the automobile sheet metal: for the accident car, the sheet metal deformation, depression, etc., need to be repaired and leveled.
2, polishing and removing the old paint layer: it can be removed by machine sanding paper p180.
  3. Clean the cloth with a dampening agent and remove the oil. Immediately wipe off with another cleaning cloth.
  4, spray two-component epoxy primer, mainly to prevent rust and fill the substrate, increase the adhesion to the substrate.
  5, after the epoxy primer is dried, use sandpaper P240 edge sand, scrape the atomic ash, sandpaper P180 and then turn to P320 fine grinding, scraping the atomic ash and grinding is a manual technique, slow work out, must be smoothed .
  6. After the atomic ash layer is dried, spray the primer in the spray, generally spray 2 times, and dry the P800 sandpaper after grinding.
  7, spray finish: two
(1), direct spray high light 2K plain topcoat, generally sprayed twice, dry with P2000 sandpaper to smooth the dust point process small hanging place, polishing waxing
(2) After spraying 1K undercoat, spray varnish, base paint, spray 2~3 layers, varnish spray twice to protect. After drying, use P2000 sandpaper to grind the dusty spot. The small sag is polished and waxed