1, Use good quality atomic ash, then the emergence of putty printing and light loss and other defects could be avoided.
2, Use high quality dual component primer and coat primer with appropriate layers.
3, The formula that should be provided by the licensed manufacturing plant, the ratio of the primary ash to the curing agent is precisely formulated.
4, If the new spray two-component film to fill, must be dried before heating fill putty. Putty paint appear if printing, you can take P1500 sanding to waxing operation recovery, if the situation is very serious, only after grinding re painting.
We are specializing in researching, producing, marketing auto paints, industrial paints with more than 15 years, providing Solid Colors Basecoat, Car Plastic Primer and so on.
