Method for Spraying Metallic Paints

The first need to clean repaired coating with the oil remover, after drying, remove dust with a dust cloth. Then first pass spray. According to the size of the spray area, dilute a certain amount of metal paint with thinner, spray the surface of the whole spray again, spray paint layer thickness should be able to see through the metal paint layer in the primer layer prevail. The spraying pressure is 290 ~ 390 kPa.
We make the second pass. After the first piece of spray is completed, the interval of 3min, clean the dust, and then spray the second time. The second coating determine the color of paint, paint should be a little thicker, spray area should be slightly expanded.
We make the third time spraying, the role of spraying is to eliminate metal stains, you can add a little more solvent to reduce the viscosity of the paint, spray area should be slightly expanded the color of old and new paint contrast.

Finally, we painted the varnish, need two times, when spraying the first layer of varnish, the metal paint layer should be completely covered.