Automotive Paint Manufacturers Teach Everyone How to Clean the Car

Today, Zhenroumei Automotive Paint Manufacturer teach everyone how to clean the car:
 First, timely cleaning the salt, dust, insects, bird droppings and other debris stuck in the car, the longer these debris stay in the car, the greater the destructive effect on the car.
 2. When flushing the car with water, be careful not to spray water into the lock hole.
3. If the car is sent to the automatic cleaning equipment for cleaning, the car with the roof antenna does not need to be removed.
Fourth, the body is stained with asphalt, oil stains, industrial dirt or insects. If it is too long, they can damage the paint from Automotive Paints Factory. Asphalt scavengers, insect removers, etc. can be used to remove stains.
5. When cleaning the surface of the body paint, do not use brushes, coarse cloth, etc., to avoid leaving scratch marks.
6. When cleaning, spray with a dispersion of water to make the hard dust infiltrate and be impacted, then scrub from top to bottom with a sponge, and finally wipe off the water with deer skin.
7. When cleaning the engine room, be careful not to splash water on the parts of the electrical system such as the distributor and ignition coil. Otherwise, the engine will not start easily, and a handful of water will splash on the electrical parts. Dry the water with a dry cloth, or blow it off with compressed air, and clean the water inside the distributor cover.
8. After washing the car or driving in the deep water area, the braking effect may be reduced due to the wetting of the brake parts. The brake should be lightly judged to determine the braking effect. If the brake is not normal, you should drive at a low speed for a while while pressing the brake to dry the brake.

The above is the car paint manufacturer introduced the car cleaning method for everyone, I hope to help everyone, you can use it in real life.