We are the Automotive Coatings Manufacturer, let me tell you how to adjust the color you want.
Coloring techniques for Automotive Coatings:
As with other paints, the color of the car paint is based on the color of the sample or sample of the paint. The general method of blending is as follows.
1. First, pay attention to the clean environment of the coloring place, fire safety, and prepare color matching containers, tools and test instruments.
2, access to information, based on experience or computer measurement to determine the composition of the main color and color of the color, to prepare for the preparation before the coloring.
3. Try the sample first. First, determine how many colors of the multi-color paint are included, and initially determine the weight of the various color paints that they participate in the color matching, as a reference for blending large samples.
5, in the color matching process, constantly stirring, sampling at any time, check the sample, adjust the look, must be patiently matched, in order to make the matching color meet the requirements.
6, when the color paint, first leave half as a spare, in case of over-heading, you can join in, and then carefully re-distributed.
7. If the sample is a dry sample, the color paint should be waited for after drying and then compared. If time is not allowed, it can be judged by experience whether the dry paint film matches the original sample before drying.
8. After the sample is registered, the quantity of the color paint to be blended is initially determined. According to the proportion of the various paints participating in the paint, the sample is matched with the same method.
9, when the color paint, should be on a sunny day or under a standard light source, do not continue to observe the color, let the eyes rest for a while and then look.
